20 files changed, 390 insertions, 17 deletions
diff --git a/.config/XMonad/lib/Defaults.hs b/.config/XMonad/lib/Defaults.hs
index 9e9d318..7e0b0a1 100644
--- a/.config/XMonad/lib/Defaults.hs
+++ b/.config/XMonad/lib/Defaults.hs
@@ -98,7 +98,7 @@ myGSConfig colorizer = (buildDefaultGSConfig myGSColorizer)
 
 myGridSelect = myGSConfig myGSColorizer
 
-myLemonbarCmd = "lemonbar -g 445x28+3395+0 -f 'SauceCodePro:style=Regular:size=11' -f 'Source Han Sans JP Normal:size=11' -B '#e6100b13' -F '#9d00ff'"
+myLemonbarCmd = "lemon | lemonbar -g 1920x28+1920+0 -o -2 -f 'Source Han Sans JP Normal:size=12' -B '#e6100b13' -F '#9d00ff'"
 myLemonbarPP  = def {
   ppCurrent            = wrap "%{B#ff0aa3}   %{F#FFFFFF}" "   %{F-}%{B-}"
   , ppVisible          = wrap "%{B#28c78f}   %{F#FFFFFF}" "   %{F-}%{B-}"
@@ -111,13 +111,13 @@ myLemonbarPP  = def {
   }
 
 myLemonbarCmd' = "lemonbar -g 343x20+1577+0 -f 'SauceCodePro:style=Regular:size=9' -f 'Source Han Sans JP Normal:size=9' -B '#e6100b13' -F '#9d00ff'"
-myLemonbarPP'  = def {
-  ppCurrent            = wrap "%{B#28c78f}   %{F#FFFFFF}" "   %{F-}%{B-}"
-  , ppVisible          = wrap "%{B#ff0aa3}   %{F#FFFFFF}" "   %{F-}%{B-}"
-  , ppHidden           = wrap "%{B#9b1bed}   %{F#FFFFFF}" "   %{F-}%{B-}"
-  , ppHiddenNoWindows  = wrap "   " "   "
-  --, ppVisibleNoWindows = wrap "%{B#ffffff}  %{F#9b1bed}" "  %{F-}%{B-}"
-  , ppWsSep            = ""
-  , ppSep              = ""
-  , ppOrder  = \(ws:l:t:ex) -> ["%{r}",ws]++[]++[]++ex
-  }
+myLemonbarPP'  = myLemonbarPP -- def {
+--   ppCurrent            = wrap "%{B#28c78f}   %{F#FFFFFF}" "   %{F-}%{B-}"
+--   , ppVisible          = wrap "%{B#ff0aa3}   %{F#FFFFFF}" "   %{F-}%{B-}"
+--   , ppHidden           = wrap "%{B#9b1bed}   %{F#FFFFFF}" "   %{F-}%{B-}"
+--   , ppHiddenNoWindows  = wrap "   " "   "
+--   --, ppVisibleNoWindows = wrap "%{B#ffffff}  %{F#9b1bed}" "  %{F-}%{B-}"
+--   , ppWsSep            = ""
+--   , ppSep              = ""
+--   , ppOrder  = \(ws:l:t:ex) -> ["%{r}",ws]++[]++[]++ex
+--   }
diff --git a/.config/glava/bars b/.config/glava/bars
new file mode 120000
index 0000000..09377e3
--- /dev/null
+++ b/.config/glava/bars
@@ -0,0 +1 @@
+/etc/xdg/glava//bars
+\ No newline at end of file
diff --git a/.config/glava/bars.glsl b/.config/glava/bars.glsl
new file mode 100755
index 0000000..6e6a7b0
--- /dev/null
+++ b/.config/glava/bars.glsl
@@ -0,0 +1,33 @@
+
+/* Center line thickness (pixels) */
+#define C_LINE 1
+/* Width (in pixels) of each bar */
+#define BAR_WIDTH 4
+/* Width (in pixels) of each bar gap */
+#define BAR_GAP 2
+/* Outline color */
+#define BAR_OUTLINE #262626
+/* Outline width (in pixels, set to 0 to disable outline drawing) */
+#define BAR_OUTLINE_WIDTH 0
+/* Amplify magnitude of the results each bar displays */
+#define AMPLIFY 300
+/* Whether the current settings use the alpha channel;
+   enabling this is required for alpha to function
+   correctly on X11 with `"native"` transparency. */
+#define USE_ALPHA 0
+/* How strong the gradient changes */
+#define GRADIENT_POWER 60
+/* Bar color changes with height */
+#define GRADIENT (d / GRADIENT_POWER + 1)
+/* Bar color */
+#define COLOR (#3366b2 * GRADIENT)
+/* Direction that the bars are facing, 0 for inward, 1 for outward */
+#define DIRECTION 0
+/* Whether to switch left/right audio buffers */
+#define INVERT 0
+/* Whether to flip the output vertically */
+#define FLIP 0
+/* Whether to mirror output along `Y = X`, causing output to render on the left side of the window */
+/* Use with `FLIP 1` to render on the right side */
+#define MIRROR_YX 0
+
diff --git a/.config/glava/circle b/.config/glava/circle
new file mode 120000
index 0000000..f53c651
--- /dev/null
+++ b/.config/glava/circle
@@ -0,0 +1 @@
+/etc/xdg/glava//circle
+\ No newline at end of file
diff --git a/.config/glava/circle.glsl b/.config/glava/circle.glsl
new file mode 100755
index 0000000..83b8ad3
--- /dev/null
+++ b/.config/glava/circle.glsl
@@ -0,0 +1,24 @@
+/* center radius (pixels) */
+#define C_RADIUS 128
+/* center line thickness (pixels) */
+#define C_LINE 1.5
+/* outline color */
+#define OUTLINE #333333
+/* Amplify magnitude of the results each bar displays */
+#define AMPLIFY 150
+/* Angle (in radians) for how much to rotate the visualizer */
+#define ROTATE (PI / 2)
+/* Whether to switch left/right audio buffers */
+#define INVERT 0
+/* Whether to fill in the space between the line and inner circle */
+#define C_FILL 0
+/* Whether to apply a post-processing image smoothing effect
+   1 to enable, 0 to disable. Only works with `xroot` transparency,
+   and improves performance if disabled. */
+#define C_SMOOTH 1
+
+/* Gravity step, overrude frin `smooth_parameters.glsl` */
+#request setgravitystep 6.0
+
+/* Smoothing factor, override from `smooth_parameters.glsl` */
+#request setsmoothfactor 0.01
diff --git a/.config/glava/env_KWin.glsl b/.config/glava/env_KWin.glsl
new file mode 100755
index 0000000..aa168ba
--- /dev/null
+++ b/.config/glava/env_KWin.glsl
@@ -0,0 +1,8 @@
+#request setdecorated false
+#request setxwintype "normal"
+#request addxwinstate "below"
+#request addxwinstate "skip_taskbar"
+#request addxwinstate "skip_pager"
+#request addxwinstate "pinned"
+#request setclickthrough true
+
diff --git a/.config/glava/env_Openbox.glsl b/.config/glava/env_Openbox.glsl
new file mode 100755
index 0000000..c95c616
--- /dev/null
+++ b/.config/glava/env_Openbox.glsl
@@ -0,0 +1,2 @@
+#request setxwintype "desktop"
+#request addxwinstate "pinned"
diff --git a/.config/glava/env_Xfwm4.glsl b/.config/glava/env_Xfwm4.glsl
new file mode 100755
index 0000000..1c20359
--- /dev/null
+++ b/.config/glava/env_Xfwm4.glsl
@@ -0,0 +1,3 @@
+#request setxwintype "desktop"
+#request addxwinstate "pinned"
+#request addxwinstate "below"
diff --git a/.config/glava/env_awesome.glsl b/.config/glava/env_awesome.glsl
new file mode 100755
index 0000000..7f2bba3
--- /dev/null
+++ b/.config/glava/env_awesome.glsl
@@ -0,0 +1 @@
+#request setxwintype "!-"
diff --git a/.config/glava/env_default.glsl b/.config/glava/env_default.glsl
new file mode 100755
index 0000000..90336cc
--- /dev/null
+++ b/.config/glava/env_default.glsl
@@ -0,0 +1 @@
+#request setxwintype "desktop"
diff --git a/.config/glava/env_i3.glsl b/.config/glava/env_i3.glsl
new file mode 100755
index 0000000..7f2bba3
--- /dev/null
+++ b/.config/glava/env_i3.glsl
@@ -0,0 +1 @@
+#request setxwintype "!-"
diff --git a/.config/glava/graph b/.config/glava/graph
new file mode 120000
index 0000000..2ad2983
--- /dev/null
+++ b/.config/glava/graph
@@ -0,0 +1 @@
+/etc/xdg/glava//graph
+\ No newline at end of file
diff --git a/.config/glava/graph.glsl b/.config/glava/graph.glsl
new file mode 100755
index 0000000..546d8d4
--- /dev/null
+++ b/.config/glava/graph.glsl
@@ -0,0 +1,31 @@
+
+/* Vertical scale, larger values will amplify output */
+#define VSCALE 300
+/* Rendering direction, either -1 (outwards) or 1 (inwards). */
+#define DIRECTION 1
+
+/* Color gradient scale, (optionally) used in `COLOR` macro */
+#define GRADIENT_SCALE 75
+/* Color definition. By default this is a gradient formed by mixing two colors.
+   `pos` represents the pixel position relative to the visualizer baseline. */
+#define COLOR mix(#802A2A, #4F4F92, clamp(pos / GRADIENT_SCALE, 0, 1))
+/* 1 to draw outline, 0 to disable */
+#define DRAW_OUTLINE 0
+/* 1 to draw edge highlight, 0 to disable */
+#define DRAW_HIGHLIGHT 1
+/* Whether to anti-alias the border of the graph, creating a smoother curve.
+   This may have a small impact on performance.
+   Note: requires `xroot` or `none` opacity to be set */
+#define ANTI_ALIAS 0
+/* outline color */
+#define OUTLINE #262626
+/* 1 to join the two channels together in the middle, 0 to clamp both down to zero */
+#define JOIN_CHANNELS 0
+/* 1 to invert (vertically), 0 otherwise */
+#define INVERT 0
+
+/* Gravity step, overrude from `smooth_parameters.glsl` */
+#request setgravitystep 2.4
+
+/* Smoothing factor, override from `smooth_parameters.glsl` */
+#request setsmoothfactor 0.015
diff --git a/.config/glava/radial.glsl b/.config/glava/radial.glsl
index 06431f2..1209c7d 100755
--- a/.config/glava/radial.glsl
+++ b/.config/glava/radial.glsl
@@ -1,6 +1,6 @@
 
 /* center radius (pixels) */
-#define C_RADIUS 128
+#define C_RADIUS 70
 /* center line thickness (pixels) */
 #define C_LINE 1
 /* outline color */
@@ -28,12 +28,12 @@
 #define BAR_ALIAS_FACTOR 100
 #define C_ALIAS_FACTOR 1
 /* Offset (Y) of the visualization */
-#define CENTER_OFFSET_Y 290
+#define CENTER_OFFSET_Y 190
 /* Offset (X) of the visualization */
-#define CENTER_OFFSET_X 690
+#define CENTER_OFFSET_X 590
 
 /* Gravity step, override from `smooth_parameters.glsl` */
-#request setgravitystep 8
+#request setgravitystep 12
 
 /* Smoothing factor, override from `smooth_parameters.glsl` */
-#request setsmoothfactor 0.03
+#request setsmoothfactor 0.02
diff --git a/.config/glava/smooth_parameters.glsl b/.config/glava/smooth_parameters.glsl
new file mode 100755
index 0000000..bfea307
--- /dev/null
+++ b/.config/glava/smooth_parameters.glsl
@@ -0,0 +1,78 @@
+
+/* Settings for smoothing functions and transformations commonly
+   used to display FFT output.
+
+   IMPORTANT: THESE VALUES CAN BE OVERRIDDEN IN MODULE CONFIG
+              FILES, IF CHANGING VALUES HERE DOES NOT WORK, CHECK
+              TO MAKE SURE THEY ARE NOT BEING SET ELSEWHERE.
+*/
+
+/* The type of formula to use for weighting values when smoothing.
+   Possible values:
+   
+   - circular     heavily rounded points
+   - sinusoidal   rounded at both low and high weighted values
+                    like a sine wave
+   - linear       not rounded at all; linear distance
+   */
+#define ROUND_FORMULA sinusoidal
+
+/* The sampling mode for processing raw FFT input:
+   
+   - average     averages all the inputs in the sample range for
+                   a given point. Produces smooth output, but peaks
+                   are not well represented
+   - maximum     obtains the best value from the closest peak in
+                   the sample range. Very accurate peaks, but
+                   output is jagged and sporadic.
+   - hybrid      uses the results from both `average` and `maximum`
+                   with the weight provided in `SAMPLE_HYBRID_WEIGHT` */
+#define SAMPLE_MODE average
+/* Weight should be provided in the range (0, 1). Higher values favour
+   averaged results. `hybrid` mode only. */
+#define SAMPLE_HYBRID_WEIGHT 0.65
+
+/* Factor used to scale frequencies. Lower values allows lower
+   frequencies to occupy more space. */
+#define SAMPLE_SCALE 8
+
+/* The frequency range to sample. 1.0 would be the entire FFT output,
+   and lower values reduce the displayed frequencies in a log-like
+   scale. */
+#define SAMPLE_RANGE 0.9
+
+/* Factor for how to scale higher frequencies. Used in a linear equation
+   which is multiplied by the result of the fft transformation. */
+#request setfftscale 10.2
+
+/* Cutoff for the bass end of the audio data when scaling frequencies.
+   Higher values cause more of the bass frequencies to be skipped when
+   scaling. */
+#request setfftcutoff 0.3
+
+/* How many frames to queue and run through the average function.
+   Increasing this value will create latency between the audio and the
+   animation, but will make for much smoother results. */
+#request setavgframes 6
+
+/* Whether to window frames ran through the average function (new & old
+   frames are weighted less). This massively helps smoothing out
+   spontaneous values in the animation. */
+#request setavgwindow true
+
+/* Gravity step, higher values means faster drops. The step is applied
+   in a rate independant method like so:
+   
+   val -= (gravitystep) * (seconds per update) */
+#request setgravitystep 4.2
+
+/* Smoothing factor. Larger values mean more smoothing in the output,
+   however high values can be expensive to compute. Values are in
+   normalized width: [0.0, 1.0) */
+#request setsmoothfactor 0.025
+
+/* Whether to use a separate pass for audio data while smoothing. On
+   most hardware, this will improve performance, but involves doing a
+   separate render step for each audio texture and will add some driver
+   (CPU) overhead. */
+#request setsmoothpass true
diff --git a/.config/glava/util b/.config/glava/util
new file mode 120000
index 0000000..3cbab73
--- /dev/null
+++ b/.config/glava/util
@@ -0,0 +1 @@
+/etc/xdg/glava//util
+\ No newline at end of file
diff --git a/.config/glava/wave b/.config/glava/wave
new file mode 120000
index 0000000..3cba0de
--- /dev/null
+++ b/.config/glava/wave
@@ -0,0 +1 @@
+/etc/xdg/glava//wave
+\ No newline at end of file
diff --git a/.config/glava/wave.glsl b/.config/glava/wave.glsl
new file mode 100755
index 0000000..6a59fbe
--- /dev/null
+++ b/.config/glava/wave.glsl
@@ -0,0 +1,14 @@
+/* min (vertical) line thickness */
+#define MIN_THICKNESS 1
+
+/* max (vertical) line thickness */
+#define MAX_THICKNESS 6
+
+/* base color to use, distance from center will multiply the RGB components */
+#define BASE_COLOR vec4(0.7, 0.2, 0.45, 1)
+
+/* amplitude */
+#define AMPLIFY 500
+
+/* outline color */
+#define OUTLINE vec4(0.15, 0.15, 0.15, 1)
diff --git a/.config/lemon.go b/.config/lemon.go
new file mode 100644
index 0000000..d242ccb
--- /dev/null
+++ b/.config/lemon.go
@@ -0,0 +1,173 @@
+package main
+
+import (
+  "bufio"
+  "fmt"
+  "os"
+  "time"
+  "golang.org/x/sys/unix"
+	"os/exec"
+	"strconv"
+  "strings"
+  "io/ioutil"
+)
+
+var (
+	data, connectedWiFi, memPercentage, cpuTemp, cpuPercentage string
+  text string = "\n"
+	moduleColor0, moduleColor1 string = "#9b1bed", "#ff0aa3"
+)
+
+func dataLoop() {
+  for {
+    data = getData()
+    time.Sleep(time.Second / 10)
+  }
+}
+
+func stdinLoop() {
+  reader := bufio.NewReader(os.Stdin)
+  for {
+    text, _ = reader.ReadString('\n')
+  }
+}
+
+func main() {
+  go dataLoop()
+  go stdinLoop()
+	go cpuUsageLoop()
+	go connectedWiFiLoop()
+	go memUsageLoop()
+	go cpuTempLoop()
+
+  for {
+    fmt.Print(data + text)
+    time.Sleep(time.Second / 10)
+  }
+}
+
+// TODO
+// volume
+// brightness (new)
+// battery
+
+func getData() string {
+	time     := "%{F" + moduleColor0 + "} "       + getTime()        + "%{F-} "
+	wifiName := "%{F" + moduleColor1 + "} WiFI: " + connectedWiFi    + "%{F-} "
+	rootFree := "%{F" + moduleColor0 + "} / "     + getDisk("/")     + "%%%{F-} "
+	homeFree := "%{F" + moduleColor1 + "} /home " + getDisk("/home") + "%%%{F-} "
+	hddFree  := "%{F" + moduleColor0 + "} /hdd "  + getDisk("/hdd")  + "%%%{F-} "
+	cpuUsage := "%{F" + moduleColor1 + "} CPU: "  + cpuPercentage    + "%%%{F-} "
+	cpuTemp  := "%{F" + moduleColor0 + "} TEMP: " + cpuTemp          + "%%{F-} "
+	memUsage := "%{F" + moduleColor1 + "} MEM: "  + memPercentage    + "%%{F-} "
+
+  return time + wifiName + rootFree + homeFree + hddFree + cpuUsage + cpuTemp + memUsage
+}
+
+func getWiFiName() string {
+	// script located in ~/.scripts/
+	// look at github.com/MikunoNaka/dots
+	cmd := exec.Command("get_wifi_name.sh")
+	name, _ := cmd.Output()
+	return string(name)
+}
+
+func connectedWiFiLoop() {
+  for {
+    connectedWiFi = getWiFiName()
+    time.Sleep(time.Second * 15)
+  }
+}
+
+func getMemUsage() string {
+	// script located in ~/.scripts/
+	// look at github.com/MikunoNaka/dots
+	cmd := exec.Command("ram_usage.sh")
+	usage, _ := cmd.Output()
+	return string(usage)
+}
+
+func memUsageLoop() {
+  for {
+		memPercentage = getMemUsage()
+    time.Sleep(time.Second * 5)
+  }
+}
+
+func getCPUTemp() string {
+	// script located in ~/.scripts/
+	// look at github.com/MikunoNaka/dots
+	cmd := exec.Command("cpu_temp.sh")
+	temp, _ := cmd.Output()
+	return string(temp)
+}
+
+func cpuTempLoop() {
+  for {
+		cpuTemp = getCPUTemp()
+    time.Sleep(time.Second * 5)
+  }
+}
+
+// TODO: maybe add dates on click
+func getTime() string {
+	now := time.Now()
+	return now.Format("3:04 PM")
+}
+
+// TODO: maybe show percentages instead of free space
+func getDisk(mountPoint string) string {
+	var stat unix.Statfs_t
+  unix.Statfs(mountPoint, &stat)
+
+	// this is witchcraft. I wrote this but I have -10000 idea how AND IF it works
+	totalSize := float64(stat.Blocks) * float64(stat.Bsize) / 1073741824
+  usedSpace := float64(stat.Bfree)  * float64(stat.Bsize) / 1073741824
+
+  return strconv.FormatFloat((100 - (usedSpace / totalSize) * 100), 'f', 0, 64)
+}
+
+func getCPUSample() (idle, total uint64) {
+  contents, err := ioutil.ReadFile("/proc/stat")
+  if err != nil {
+    return
+  }
+  lines := strings.Split(string(contents), "\n")
+  for _, line := range(lines) {
+    fields := strings.Fields(line)
+    if fields[0] == "cpu" {
+      numFields := len(fields)
+      for i := 1; i < numFields; i++ {
+        val, err := strconv.ParseUint(fields[i], 10, 64)
+        if err != nil {
+          fmt.Println("Error: ", i, fields[i], err)
+        }
+        total += val // tally up all the numbers to get total ticks
+        if i == 4 {  // idle is the 5th field in the cpu line
+          idle = val
+        }
+      }
+      return
+    }
+  }
+  return
+}
+
+func getCPUUsage() {
+  idle0, total0 := getCPUSample()
+  time.Sleep(3 * time.Second)
+  idle1, total1 := getCPUSample()
+
+  idleTicks := float64(idle1 - idle0)
+  totalTicks := float64(total1 - total0)
+  cpuUsage := 100 * (totalTicks - idleTicks) / totalTicks
+
+  cpuPercentage = strconv.Itoa(int(cpuUsage))
+}
+
+func cpuUsageLoop() {
+  for {
+    getCPUUsage()
+    time.Sleep(5 * time.Second)
+  }
+}
diff --git a/.config/zsh/.zshenv b/.config/zsh/.zshenv
index 77f8e54..28b7330 100644
--- a/.config/zsh/.zshenv
+++ b/.config/zsh/.zshenv
@@ -1,7 +1,6 @@
 export EDITOR="nvim"
 export VISUAL="emacs"
 export TERMINAL="st"
-# export BROWSER="librewolf"
 export BROWSER="librewolf --private-window"
 export READER="zathura"
 export COLORTERM="truecolor"