pushing glava config

3 files changed, 267 insertions, 0 deletions

diff --git a/.config/glava/radial b/.config/glava/radial
new file mode 120000
index 0000000..04fe5e4
--- /dev/null
+++ b/.config/glava/radial
@@ -0,0 +1 @@
+/etc/xdg/glava//radial
\ No newline at end of file
diff --git a/.config/glava/radial.glsl b/.config/glava/radial.glsl
new file mode 100755
index 0000000..a5b966c
--- /dev/null
+++ b/.config/glava/radial.glsl
@@ -0,0 +1,39 @@
+
+/* center radius (pixels) */
+#define C_RADIUS 128
+/* center line thickness (pixels) */
+#define C_LINE 1
+/* outline color */
+#define OUTLINE #ffffff
+/* number of bars (use even values for best results) */
+#define NBARS 200
+/* width (in pixels) of each bar*/
+#define BAR_WIDTH 8
+/* outline color */
+#define BAR_OUTLINE OUTLINE
+/* outline width (in pixels, set to 0 to disable outline drawing) */
+#define BAR_OUTLINE_WIDTH 0
+/* Amplify magnitude of the results each bar displays */
+#define AMPLIFY 300
+/* Bar color */ 
+#define COLOR (#9400ff * ((d / 128) + 0.6))
+/* Angle (in radians) for how much to rotate the visualizer */
+#define ROTATE (0)
+/* Whether to switch left/right audio buffers */
+#define INVERT 0
+/* Aliasing factors. Higher values mean more defined and jagged lines.
+   Note: aliasing does not have a notable impact on performance, but requires
+   `xroot` transparency to be enabled since it relies on alpha blending with
+   the background. */
+#define BAR_ALIAS_FACTOR 100
+#define C_ALIAS_FACTOR 1
+/* Offset (Y) of the visualization */
+#define CENTER_OFFSET_Y 290
+/* Offset (X) of the visualization */
+#define CENTER_OFFSET_X 690
+
+/* Gravity step, override from `smooth_parameters.glsl` */
+#request setgravitystep 8
+
+/* Smoothing factor, override from `smooth_parameters.glsl` */
+#request setsmoothfactor 0.03
diff --git a/.config/glava/rc.glsl b/.config/glava/rc.glsl
new file mode 100755
index 0000000..f560b8d
--- /dev/null
+++ b/.config/glava/rc.glsl
@@ -0,0 +1,227 @@
+
+/* The module to use. A module is a set of shaders used to produce
+   the visualizer. The structure for a module is the following:
+   
+   module_name [directory]
+       1.frag [file: fragment shader],
+       2.frag [file: fragment shader],
+       ...
+       
+   Shaders are loaded in numerical order, starting at '1.frag',
+   continuing indefinitely. The results of each shader (except
+   for the final pass) is given to the next shader in the list
+   as a 2D sampler.
+   
+   See documentation for more details. */
+#request mod bars
+
+/* Window hints */
+#request setfloating  true
+#request setdecorated false
+#request setfocused   false
+#request setmaximized true
+
+/* Set window background opacity mode. Possible values are:
+   
+   "native" - True transparency provided by the compositor. Can
+              reduce performance on some systems, depending on
+              the compositor used.
+   
+   "xroot"  - Maintain a copy of the root window's pixmap
+              (usually the desktop background) to provide a
+              pseudo-transparent effect. Useful when no compositor
+              is available or native transparency isn't nessecary.
+              Has very little performance impact.
+    
+   "none"   - Disable window opacity completely. */
+#request setopacity "native"
+
+/* Whether to mirror left and right audio input channels from PulseAudio.*/
+#request setmirror false
+
+/* OpenGL context and GLSL shader versions, do not change unless
+   you *absolutely* know what you are doing. */
+#request setversion 3 3
+#request setshaderversion 330
+
+/* Window title */
+#request settitle "GLava"
+
+/* Window geometry (x, y, width, height) */
+#request setgeometry 0 0 1920 1080
+
+/* Window background color (RGB format).
+   Does not work with `setopacity "xroot"` */
+#request setbg 00000000
+
+/* (X11 only) EWMH Window type. Possible values are:
+   
+   "desktop", "dock",   "toolbar", "menu",
+   "utility", "splash", "dialog",  "normal"
+   
+   This will set _NET_WM_WINDOW_TYPE to _NET_WM_WINDOW_TYPE_(TYPE),
+   where (TYPE) is the one of the window types listed (after being
+   converted to uppercase).
+   
+   Alternatively, you can set this value to "!", which will cause
+   the window to be unmanaged. If this is set, then `addxwinstate`
+   will do nothing, but you can use "!+" and "!-" to stack on top
+   or below other windows.
+*/
+#request setxwintype "normal"
+
+/* (X11 only) EWMH Window state atoms (multiple can be specified).
+   Possible values are:
+   
+   "modal", "sticky", "maximized_vert", "maximized_horz",
+   "shaded", "skip_taskbar", "skip_pager", "hidden", "fullscreen",
+   "above", "below", "demands_attention", "focused", "pinned"
+   
+   This will add _NET_WM_STATE_(TYPE) atoms to _NET_WM_STATE,
+   where (TYPE) is one of the window states listed (after being
+   converted to uppercase).
+   
+   The lines below (commented out by default) are of relevance
+   if you are trying to get GLava to behave as a desktop widget
+   and your WM is not correctly responding to the "desktop" value
+   for `setxwintype`.
+*/
+// #request addxwinstate "sticky"
+// #request addxwinstate "skip_taskbar"
+// #request addxwinstate "skip_pager"
+// #request addxwinstate "above"
+// #request addxwinstate "pinned"
+
+/* (X11 only) Use the XShape extension to support clicking through
+   the GLava window. Useful when you want to interact with other
+   desktop windows (icons, menus, desktop shells). Enabled by
+   default when GLava itself is a desktop window. */
+#request setclickthrough false
+
+/* Audio source
+
+   When the "pulseaudio" backend is set, this can be a number or
+   a name of an audio sink or device to record from. Set to "auto"
+   to use the default output device.
+   
+   When the "fifo" backend is set, "auto" is interpreted as
+   "/tmp/mpd.fifo". Otherwise, a valid path should be provided. */
+#request setsource "auto"
+
+/* Buffer swap interval (vsync), set to '0' to prevent
+   waiting for refresh, '1' (or more) to wait for the specified
+   amount of frames. */
+#request setswap 1
+
+/* Linear interpolation for audio data frames. Drastically
+   improves smoothness with configurations that yield low UPS
+   (`setsamplerate` and `setsamplesize`), or monitors that have
+   high refresh rates.
+   
+   This feature itself, however, will effect performance as it
+   will have to interpolate data every frame on the CPU. It will
+   automatically (and temporarily) disable itself if the update
+   rate is close to, or higher than the framerate:
+   
+   if (update_rate / frame_rate > 0.9) disable_interpolation;
+   
+   This will delay data output by one update frame, so it can
+   desync audio with visual effects on low UPS configs. */
+#request setinterpolate true
+
+/* Frame limiter, set to the frames per second (FPS) desired or
+   simply set to zero (or lower) to disable the frame limiter. */
+#request setframerate 0
+
+/* Suspends rendering if a fullscreen window is focused while
+   GLava is still visible (ie. on another monitor). This prevents
+   rendering from interfering with other graphically intensive
+   tasks.
+
+   If GLava is minimized or completely obscured, it will not
+   render regardless of this option. */
+#request setfullscreencheck false
+
+/* Enable/disable printing framerate every second. 'FPS' stands
+   for 'Frames Per Second', and 'UPS' stands for 'Updates Per
+   Second'. Updates are performed when new data is submitted
+   by pulseaudio, and require transformations to be re-applied
+   (thus being a good measure of how much work your CPU has to
+   perform over time) */
+#request setprintframes true
+
+/* PulseAudio sample buffer size. Lower values result in more
+   frequent audio updates (also depends on sampling rate), but
+   will also require all transformations to be applied much 
+   more frequently (CPU intensive).
+   
+   High (>2048, with 22050 Hz) values will decrease accuracy
+   (as some signals can be missed by transformations like FFT)
+   
+   The following settings (@22050 Hz) produce the listed rates: 
+   
+   Sample    UPS                  Description
+   - 2048 -> 43.0  (low accuracy, cheap), use with < 60 FPS
+   - 1024 -> 86.1  (high accuracy, expensive), use with >= 60 FPS
+   -  512 -> 172.3 (extreme accuracy, very expensive), use only
+                   for graphing accurate spectrum data with
+                   custom modules.
+   
+   If the framerate drops below the update rate, the update rate
+   will be locked to the framerate (to prevent wasting CPU time).
+   This behaviour means you can use a 1024 sample size on a 60Hz
+   monitor with vsync enabled to get 60FPS and 60UPS.
+   
+   For high refresh rate monitors (120+ Hz), it's recommended to
+   also stick with the 1024 sample size and use interpolation to
+   smooth the data, as accuracy beyond this setting is mostly
+   meaningless for visual purposes.
+*/
+#request setsamplesize 1024
+
+/* Audio buffer size to be used for processing and shaders. 
+   Increasing this value can have the effect of adding 'gravity'
+   to FFT output, as the audio signal will remain in the buffer
+   longer.
+
+   This value has a _massive_ effect on FFT performance and
+   quality for some modules. */
+#request setbufsize 4096
+
+/* PulseAudio sample rate. Lower values can add 'gravity' to
+   FFT output, but can also reduce accuracy. Most hardware
+   samples at 44100Hz.
+   
+   Lower sample rates also can make output more choppy, when
+   not using interpolation. It's generally OK to leave this
+   value unless you have a strange PulseAudio configuration.
+
+   This option does nothing when using the "fifo" audio
+   backend. Instead, an ideal rate should be be configured
+   in the application generating the output. */
+#request setsamplerate 22050
+
+/*                    ** DEPRECATED **
+   Force window geometry (locking the window in place), useful
+   for some pesky WMs that try to reposition the window when
+   embedding in the desktop.
+   
+   This routinely sends X11 events and should be avoided. */
+#request setforcegeometry false
+
+/*                    ** DEPRECATED **
+   Force window to be raised (focused in some WMs), useful for
+   WMs that have their own stacking order for desktop windows.
+   
+   This routinely sends X11 events and should be avoided. */
+#request setforceraised false
+
+/*                    ** DEPRECATED **
+   Scale down the audio buffer before any operations are 
+   performed on the data. Higher values are faster.
+   
+   This value can affect the output of various transformations,
+   since it applies (crude) averaging to the data when shrinking
+   the buffer. It is reccommended to use `setsamplerate` and
+   `setsamplesize` to improve performance or accuracy instead. */
+#request setbufscale 1