path: root/.config/polybar/config.ini

;==========================================================
;
;
;   ██████╗  ██████╗ ██╗  ██╗   ██╗██████╗  █████╗ ██████╗
;   ██╔══██╗██╔═══██╗██║  ╚██╗ ██╔╝██╔══██╗██╔══██╗██╔══██╗
;   ██████╔╝██║   ██║██║   ╚████╔╝ ██████╔╝███████║██████╔╝
;   ██╔═══╝ ██║   ██║██║    ╚██╔╝  ██╔══██╗██╔══██║██╔══██╗
;   ██║     ╚██████╔╝███████╗██║   ██████╔╝██║  ██║██║  ██║
;   ╚═╝      ╚═════╝ ╚══════╝╚═╝   ╚═════╝ ╚═╝  ╚═╝╚═╝  ╚═╝
;
;
;   To learn more about how to configure Polybar
;   go to https://github.com/polybar/polybar
;
;   The README contains a lot of information
;
;==========================================================

[colors]
;background = #dd1e2120
background = #e6100b13
foreground = #FFFFFF

;systray-bg = #232627
systray-bg = #e6100b13


;module-color-0 = #9b1bed
;module-color-1 = #ff0aa3
module-color-0 = #1ca09d
module-color-1 = #2be38f
module-bg = #e6100b13
 
;xwindow-fg = #9d00ff
xwindow-fg = #1ca09d

;ws-active-fg = #ffffff
ws-active-fg = #232627
ws-active-bg = ${colors.module-color-1}
ws-active-ul = #d33682

ws-occupied-fg = #FFFFFF
ws-occupied-bg = ${colors.module-color-0}
ws-occupied-ul = #130f23

ws-empty-fg = ${colors.xwindow-fg}
ws-empty-bg = ${colors.background}
ws-empty-ul = ${colors.background}

time-fg = ${colors.module-color-0}
time-bg = ${colors.module-bg}

uptime-fg = ${colors.module-color-0}
uptime-bg = ${colors.module-bg}

ethernet-fg = ${colors.module-color-1}
ethernet-bg = ${colors.module-bg}

wifi-fg = ${colors.ethernet-fg}
wifi-bg = ${colors.module-bg}

fs-root-fg = ${colors.module-color-0}
fs-root-bg = ${colors.module-bg}

fs-home-fg = ${colors.module-color-1}
fs-home-bg = ${colors.module-bg}

fs-hdd-fg = ${colors.module-color-0}
fs-hdd-bg = ${colors.module-bg}

cpu-fg = ${colors.module-color-1}
cpu-bg = ${colors.module-bg}

temp-fg = ${colors.module-color-0}
temp-bg = ${colors.module-bg}

mem-fg = ${colors.module-color-1}
mem-bg = ${colors.module-bg}

vol-fg = ${colors.module-color-0}
vol-bg = ${colors.module-bg}
;vol-fg-alt = #c32aeb
vol-fg-alt = ${colors.module-color-1}

batt-charging-bg = ${colors.module-bg}
batt-charging-fg = ${colors.module-color-0}

batt-discharging-bg = ${colors.module-bg}
batt-discharging-fg = ${colors.module-color-1}

batt-full-bg = ${colors.module-bg}
batt-full-fg = ${colors.module-color-0}

; same as mybar but on second monitor
; also has different font size, bar height, etc
; modules are the same and should be synced if either is changed
[bar/mybar2]
monitor = ${env:MONITOR:HDMI-0}
enable-ipc = true
width = 1920
height = 20
offset-x = 0
offset-y = 0
radius = 0
fixed-center = true
bottom = 0

background = ${colors.background}
foreground = ${colors.foreground}

line-size = 0
line-color = #f00

border-size = 0
border-color = #00000000

padding-left = 0
padding-right = 0

module-margin-left = 0
module-margin-right = 0

font-0 = "SauceCodePro:style=Regular:size=9;3"
font-1 = "Source Han Sans JP Normal:size=9;3"
font-2 = "RobotoMono Nerd Font Mono:size=22;5"
font-3 = fixed:pixelsize=10;1
;font-4 = unifont:fontformat=truetype:size=8:antialias=false;0
;font-5 = siji:pixelsize=10;1

modules-left = date uptime wlan eth filesystem-root filesystem-home filesystem-hdd cpu temperature memory xwindow
modules-right = battery pulseaudio ewmh

tray-position = right
tray-padding = 2
tray-background = ${colors.systray-bg}

override-redirect = false

cursor-click = pointer
cursor-scroll = ns-resize

[bar/mybar]
;monitor = ${env:MONITOR:eDP-1}
enable-ipc = true
width = 1920
height = 28
offset-x = 0
offset-y = 0
radius = 0
fixed-center = true
bottom = 0

background = ${colors.background}
foreground = ${colors.foreground}

line-size = 0
line-color = #f00

border-size = 0
border-color = #00000000

padding-left = 0
padding-right = 0

module-margin-left = 0
module-margin-right = 0

font-0 = "SauceCodePro:style=Regular:size=12;3"
font-1 = "Source Han Sans JP Normal:size=11;2"
font-2 = "RobotoMono Nerd Font Mono:size=22;5"
font-3 = fixed:pixelsize=10;1
;font-4 = unifont:fontformat=truetype:size=8:antialias=false;0
;font-5 = siji:pixelsize=10;1

modules-left = date uptime wlan eth filesystem-root filesystem-home filesystem-hdd cpu temperature memory xwindow
modules-right = battery pulseaudio ewmh

override-redirect = true

cursor-click = pointer
cursor-scroll = ns-resize

[module/xwindow]
type = internal/xwindow
label = "  %title:0:50:...%"
label-foreground = ${colors.xwindow-fg}

[module/filesystem-root]
type = internal/fs
interval = 25

mount-0 = /

label-mounted = "  %{A1:pcmanfm /:}%mountpoint% %percentage_used%%%{A1}  "
label-mounted-background = ${colors.fs-root-bg}
label-mounted-foreground = ${colors.fs-root-fg}

[module/filesystem-home]
type = internal/fs
interval = 25

mount-0 = /home

label-mounted = "  %{A1:pcmanfm /home:}%mountpoint% %percentage_used%%%{A1}  "
label-mounted-background = ${colors.fs-home-bg}
label-mounted-foreground = ${colors.fs-home-fg}

[module/filesystem-hdd]
type = internal/fs
interval = 25

mount-0 = /hdd

label-mounted = "  %{A1:pcmanfm /hdd:}%mountpoint% %percentage_used%%%{A1}  "
label-mounted-background = ${colors.fs-hdd-bg}
label-mounted-foreground = ${colors.fs-hdd-fg}

[module/cpu]
type = internal/cpu
interval = 2
label = "  CPU: %percentage:2%%  "
label-background = ${colors.cpu-bg}
label-foreground = ${colors.cpu-fg}

[module/memory]
type = internal/memory
interval = 2


label-background = ${colors.mem-bg}
label-foreground = ${colors.mem-fg}
label = "  MEM: %percentage_used%%  "

[module/wlan]
type = internal/network
interface = wlo1
interval = 3.0

format-connected = <ramp-signal> <label-connected>
format-connected-background = ${colors.wifi-bg}
format-connected-foreground = ${colors.wifi-fg}
label-connected = "%{A1:alacritty -t 'nmtui' -e 'nmtui':}WIFI: %essid% (%local_ip%)%{A1}"
;label-connected = "%local_ip%"

label-disconnected = ""
label-disconnected-foreground = ${colors.foreground}
label-disconnected-background = ${colors.wifi-bg}

ramp-signal-0 =
ramp-signal-1 =
ramp-signal-2 =
ramp-signal-3 =
ramp-signal-4 =
ramp-signal-foreground = ${colors.foreground}

[module/eth]
type = internal/network
interface = eno1
interval = 3.0

label-connected-background = ${colors.ethernet-bg}
label-connected-foreground = ${colors.ethernet-fg}

format-connected-underline = #55aa55
format-connected-prefix = ""
format-connected-prefix-foreground = ${colors.foreground}
label-connected = "  %local_ip% "

format-disconnected =
;format-disconnected = <label-disconnected>
;format-disconnected-underline = ${self.format-connected-underline}
;label-disconnected = %ifname% disconnected
;label-disconnected-foreground = ${colors.foreground-alt}

[module/date]
type = internal/date
interval = 5

time = "  %I:%M %p  "
time-alt = "  %d %B %Y (%A) %H:%M:%S  "

format-foreground = ${colors.time-fg}
format-background = ${colors.time-bg}

label = %{A3:#uptime.module_toggle:}%time%%{A3}

[module/uptime]
type = custom/script
click-left = module_toggle
interval = 100
;exec = "uptime | awk -F, '{sub(".*up ",x,$1);sub(" min","M",$1);print $1}'"
exec = "uptime | awk -F, '{sub(".*up ",x,$1);sub(" min","M",$1);sub(":","H ",$1);print $1"M"}'"
label = "/ UP:%output%  "

hidden = true
format-foreground = ${colors.uptime-fg}
format-background = ${colors.uptime-bg}

[module/pulseaudio]
type = internal/pulseaudio
format-volume = <label-volume>
label-volume = "   VOL: %percentage%%   "
label-volume-background = ${colors.vol-bg}
label-volume-foreground = ${colors.vol-fg}

label-muted = "  MUTED  "
label-muted-foreground = ${colors.vol-fg-alt}
label-muted-background = ${colors.vol-bg}

[module/temperature]
type = internal/temperature
thermal-zone = 0
warn-temperature = 65

label = "  TEMP: %temperature-c%  "
label-warn-foreground = ${colors.vol-fg-alt}
label-warn-background = ${colors.temp-bg}

label-background = ${colors.temp-bg}
label-foreground = ${colors.temp-fg}

[settings]
screenchange-reload = true
;compositing-background = xor
;compositing-background = screen
;compositing-foreground = source
;compositing-border = over
;pseudo-transparency = false

[global/wm]
margin-top = 0
margin-bottom = 0

[module/battery]
type = internal/battery

; This is useful in case the battery never reports 100% charge
full-at = 100

; Use the following command to list batteries and adapters:
; $ ls -1 /sys/class/power_supply/
battery = BAT0
adapter = ADP1

poll-interval = 5

label-full = 
label-discharging = "  BATT: %percentage%%  "
label-charging = "  BATT: %percentage%%  "

label-charging-background = ${colors.batt-charging-bg}
label-charging-foreground = ${colors.batt-charging-fg}

label-discharging-background = ${colors.batt-discharging-bg}
label-discharging-foreground = ${colors.batt-discharging-fg}

label-full-background = ${colors.batt-full-bg}
label-full-foreground = ${colors.batt-full-fg}

[module/ewmh]
type = internal/xworkspaces

pin-workspaces = false
enable-click = true
enable-scroll = false
format = <label-state>

label-monitor = %name%

label-active = %name%
label-active-foreground = ${colors.ws-active-fg}
label-active-background = ${colors.ws-active-bg}
label-active-underline = ${colors.ws-active-ul}
label-active-padding = 3

label-occupied = %name%
label-occupied-foreground = ${colors.ws-occupied-fg}
label-occupied-background = ${colors.ws-occupied-bg}
label-occupied-underline = ${colors.ws-occupied-ul}
label-occupied-padding = 3

label-empty = %name%
label-empty-foreground = ${colors.ws-empty-fg}
label-empty-background = ${colors.ws-empty-bg}
label-empty-underline = ${colors.ws-empty-ul}
label-empty-padding = 3

label-background = #FFFFFF

label-urgent = %name%
label-urgent-foreground = #000000
label-urgent-background = #bd2c40
label-urgent-underline = #9b0a20
label-urgent-padding = 0